联系电话

010-84823065

产品展示/ PRODUCTS PLAY

我的位置:首页  >  产品展示  >  德国威卡WIKA  >  威卡wika压力变送器  >  PGT23.100德国威卡wika压力表上海

相关文章 / ARTICLE

PGT23.100德国威卡wika压力表上海

描述:PGT23.100/PGT23.160 德国威卡wika压力


智能型波登管压力表带电信号输出,不锈钢系列,安全型,表圆直径 100,160
型号:PGT23.100/PGT23.160

  • 产品型号:PGT23.100
  • 厂商性质:代理商
  • 更新时间:2017-07-17
  • 访问量:1834
产品介绍/ PRODUCT PRESENTATION

PGT23.100/PGT23.160 德国威卡wika压力

 

智能型波登管压力表带电信号输出,不锈钢系列,安全型,表圆直径 100,160
型号:PGT23.100/PGT23.160
 

 

应 用

Acquisition and display of process values

Transmission of process value to the control room, 4 ... 20 mA; 0 ... 20 mA; 0 ... 10 V

Easy-to-read, local analogue display needs no power supply

Safety-related applications

 

特别功能

„Plug and play“ means no configuration necessary

Signal transmission in accordance with Namur

Measuring ranges from 0.6 bar to 1000 bar

Easy-to-read, Ø 100 mm analogue display

S3 Safety pressure gauge per EN 837-1

 
 

inliGAUGE Model PGT23.100

 

详 细

Nominal size
100 mm

Accuracy class
Class 1.0

Display range
0 … 0.6 up to 0 … 1000 bar
including all corresponding ranges for negative and/or negative and positive/compound pressure

Wherever the process pressure has to be indicated locally,and, at the same time, signal transmission to a central controller or remote control room is wanted, the PGT23.100 inliGAUGE
can be used.
Through the combination of a mechanical measuring system and electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The PGT23.100 inliGAUGE fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for the mechanical
pressure indication can thus be saved.

The PGT23.100 is built upon a high-quality, stainless steel pressure gauge with a 100 mm nominal size. The pressure gauge is manufactured in accordance with EN 837-1.

 The durable, fully-welded Bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore compley free from wear and friction. From this, the pressure-proportional, 4 ... 20 mA electrical output signal is produced.
The electronic WIKA transmitter, integrated into the highquality Model 23x.30 mechanical pressure gauge, combines the advantages of electrical signal transmission with the
advantages of a local mechanical display.

The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.

________________________________________________________

Accessory: Power supply for top hat rail
留言询价/ MESSAGE INQUIRY

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
微信扫一扫
010-84823065

地址:北京市朝阳区成寿寺路134号4-2209

Baidu
map